Kuwait Autoamatic food can line
Descrição do produto
Fully automatic food can line .Including automatic duplex slitter,Can body welder, Insider&outside coating with high frequency induction oven, can body forming machine .Leakage tester. Used for make the food sardine tomato paste can making with speed range 200-400cpm. 
1. Automatic Duplex slitter
For can-making company to produce the blanks for the can body.
with Mitsubishi electric control components. YUKEN hydraulic components.
The first cutting knives is belong to carbide alloy.
 |
Model | GT10CA |
| Max feeding Size | 1200x1200mm | |
| Min Feeding Size | 600x600mm | |
| Slitting thickness | 0.12-0.5mm | |
| Slitting speed : | 32SPM | |
| Diagonal tolerance | ≤0.05mm | |
| Max 1st Slitting qt | 6strips | |
| Max 2nd SlittingQt | 12strips (75-1200mm) | |
| Power | 12KW |
2. Automatic seam welder
 |
Modle | FHZ-300 |
| Production capacity | 200-300< cpm | |
| Can diameter | 52-99mm | |
| Can height | 39-120mm | |
| Line speed | 30-50m/min | |
| Weldering frequency | 300-700Hz | |
| Copper wire | 1.27-1.38mm | |
| Raw materials | Tinplate |
3. Rear Feeding Seaming Welding Machine
 |
Model: | LS-B5 |
| Cool capacity: | 8500/33745KCAL/BTV | |
| Pump power: | 0.375Kw | |
| Voltage: | 380V/50Hz | |
| Air-pressed power: | 2.25Kw | |
| Tank capacity: | 55LT | |
| Net weight: | 160kgs | |
| Dimension: | 1000x700x1050mm |
4. Inside Outside coating machine
This machine use connecting hanging up conveyor system which is better for powder coating. Model:
 |
Model: | GNWT-420 |
| Can diameter | 52-105mm | |
| Coating manner: | Spray way | |
| Coating width: | 10-15mm | |
| Dimension | 1350x800x1800mm | |
| Weight | 450kgs |
5. Induction oven machine
This machine used for dry the can body after lacquering with high frequency induction. Drying capability:
 |
Drying capability: | 12-57m/min |
| Model | GTCHG-180 | |
| Drying manner: | High frequency induction curling system | |
| Size of dryer: | 10660x1410x1800mm | |
| Max power consumption | 18kwh | |
| weight | 3000kg |
6. Inside Powder coating machine
This machine take Japan SMC valve,with Mitsubishi PLC and frequency inverter. Model
 |
Model | CTPC-2 |
| Conveying speed | 5-60m/min | |
| Coating width | 10-20mm | |
| Can diameter | 52-280mm | |
| Powder type | Polyester | |
| Air compressor | 0.4mpa,0.5m3/min | |
| Motor power | AC220,50HA 2.8KW |
7. Body Flanging beading seaming machine
Vertical design,easy to connect with other machine Recyclable central lubricating system
Multi-safety design for machine and personal safety
Flanging spin rolls are driver by tiny gears receptively Carbide material for machine and personal safety
Can guide and star-wheel with chromium plating
 |
Model | GT3B49NFBS |
| Diameter | 52-99mm | |
| Height | 50-160mm | |
| Speed | 200-600mm | |
| Inch | 202-401 | |
| Motor power | 5.5kw | |
| Weight | 5000kg |
8. Automatic Can palletizer
This machine used for palletizer the cans after producing. Model
 |
Model | GT3B49NFBS |
| Diameter | 52-99 | |
| Height | 50-160mm | |
| Speed | 300cpm | |
| Inch | 202-401 | |
| Motor power | 3.5kw | |
| Weight | 2000kg |
Contacte-nos
Jiujiang Yongxin Can Equipment Co., Ltd.
Endereço: No.5 Antai Road, Zona de Desenvolvimento da Indústria Automobilística, Cidade de Jiujiang, China. 332000
Tel:86-792-8326978
Celular:8618970289827
Email:liyingquan@126.com
